-
10mm Base - 6mm Sides - 5mm Cabin sides – 4mm Cabin top.
-
Certified European steel
-
Front and rear lockers with hardwood trimmed marine
ply lids.
-
Solid timber glazed front doors
-
Channel Glaze windows and portholes (Double glazed option)
-
All Anodes
-
Horn, Tunnel light
and Navigation lights
-
Fenders and Ropes
-
100 gallon water tank in welded polypropylene
-
Vetus 42hp engine with ZF gearbox and twin alternator
-
Vetus shaft gear and propeller
-
Full 240 Volt electrical systems running from a 1500W Powermaster full sine wave inverter and 4 * 200Ah
battery pack (six can be fitted for continuous cruising boat)
-
Low energy 240 volt lighting system
-
Heating by either Bubble pressure
jet boiler mounted in the engine room or Bubble Corner stove (to choice) Both provide heating to radiators and hot water tank
-
Domestic
water system by Grunfoss/Salamander pump set giving full ‘mains’ pressure and flow rate.
-
British made DEP calorifier tested to 5 Bar
– 17-20 gall capacity and heated from Engine, Heating boiler and Immersion heater
-
Insulation is 3M Thinsulate in our now renowned
twin 19mm layer system.
-
Wall Panels constructed of solid Oak or Ash with Oak/Ash faced ply infill.
-
Floors are 15mm Engineered
timber of Oak and Ceramic tiling to Kitchen and Bathroom
-
Open Frame solid Oak rear stairway –Front steps with built in drawers
-
Bathroom
walls are Multipanel waterproof laminate on ply *
-
Kitchen surfaces are Staron solid 12mm Acrylic on ply with bonded sinks*
-
Kitchen
includes Spinflo cooker and Whirlpool fridge.
-
All partitions built of studding and 9mm ply with Thinsulate Acoustic sound proofing
material in the wall cavity
-
All furniture is hand made in solid timber and ply
-
Solid timber window and porthole liners
-
And much much
more in detail to give you a solid and reliably built boat for a true live aboard standard.
